BVSYH - PVC CEMENT QUICK-SET & STANDARD

  • MSDS: BVSYH
  • Manufacturer: ARROW ADHESIVES CO
  • Product Name: PVC CEMENT QUICK-SET & STANDARD
  • National Stock Number: 8040-00F037049
Product Identification

Product ID:PVC CEMENT QUICK-SET & STANDARD
MSDS Date:05/27/1986
FSC:8040
NIIN:00F037049
MSDS Number: BVSYH

Responsible Party
ARROW ADHESIVES CO
5457 SPALDING DR
NORCROSS, GA 30092-5000
US

Emergency Phone: 404-448-9058

Info Phone: 404-448-9058

Cage: GO362

Contractor
ARROW ADHESIVES CO
NORCROSS, GA 30092-5000 US

Telephone: 404-448-9058

Cage: GO362

Ingredients

TETRAHYDROFURAN

CAS: 109-99-9

RTECS: LU5950000

OSHA PEL 200 PPM

ACGIH TLV: 200 MG/CUM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 200 PPM

ACGIH TLV: 200 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ACETONE; DIMETHYL KETONE; 2-PROPANONE

CAS: 67-64-1

RTECS: AL3150000

OSHA PEL 1000 MG/CUM

ACGIH TLV: 750 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CYCLOHEXANONE, KETOHEXAMETHYLENE

CAS: 108-94-1

RTECS: GW1050000

OSHA PEL 50 PPM

ACGIH TLV: 25 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, HEADACHE,
NAUSEA. SKIN: IRRITATION & DEFATTING. EYES: IRRITATION & REDNESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, HEADACHE, NAUSEA, SKIN:
IRRITATION & DEFATTING. EYES: IRRITATION & REDNESS.

First Aid

First Aid:INHALATION: MOVE TO FRESH AIR. SKIN: WASH W/SOAP &WATER.
EYES: FLUSH REPEATEDLY W/WATER FOR 15 MINS. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:-4F
Lower Limits:2
Upper Limits:12
Extinguishing Media:CO2/DRY CHEMICAL
Unusual Fire/Explosion Hazard:VAPOR IS HEAVIER THAN AIR & MAY TRAVEL
ALONG FLOOR/GROUND TO IGNITION SOURCES AWAY FROM USE AREA.

Accidental Release

Spill Release Procedures:ELIMINATE IGNITION SOURCES. TURN OFF ELECTRIC
MOTORS. ABSORB LIQUID ON RAGS/PAPER TOWELS & REMOVE TO OUTDOORS.
VENTILATE AREA.

Handling

Handling and Storage Precautions:STORE IN COOL AREA AWAY FROM PILOT
LIGHTS & IGNITION SOURCES. USE ONLY IN WELL VENTILATED AREA.

Exposure Controls

Respiratory Protection:NOT NEEDED W/NORMAL USE
Ventilation:LOCAL EXHAUST. MECHANICAL EXHAUST IF NECESSARY TO MAINTAIN
EXPOSURE BELOW TLV.
Protective Gloves:RUBBER
Eye Protection:REQUIRED
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:133F
Vapor Pres:186
Vapor Density:2.5
Spec Gravity:0.91
Evaporation Rate & Reference:(BU AC =1):6
Appearance and Odor:LOW VISCOSITY LIQUID W/EHTER-LIKE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:FLAMES, PILOT LIGHTS & OTHER IGNITION
SOURCES.
Hazardous Decomposition Products:CO2, CO, HYDROGEN, CHLORIDE, VARIOUS
HYDROCARBONS.
Conditions to Avoid Polymerization:CATIONIC INITIATORS SUCH AS SELECTED
LEWIS ACIDS/STRONG PROTON ACIDS.

Disposal

Waste Disposal Methods:DISPOSE OF IAW/LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.